Skip to content

Posts from the ‘Agriculture’ Category

Aug 8

1 Comment

A New Method for Preventing Snow Mold In Winter Wheat (Part 2)

When faced with a reluctant spring thaw, dryland wheat growers know they have only two weeks to remove the snow from their fields, or large sections of their crop will die off from snow mold.  Melting the snow artificially can be an expensive process, but one southern Idaho wheat grower has found a unique solution that could save both money and the environment  (see part 1).  He covers the snow with displaced topsoil, which speeds up the warming process and is less expensive than using traditional fly ash.  This week, find out which techniques Campbell uses to save time and money while redistributing his soil.

A snow dusted field with a partly cloudy sky and a bright sunset

Campbell says the number of passes he has to make with his tractor makes a difference.

Soil Application

Campbell says the number of passes he has to make with his tractor makes a difference, so he spreads the soil in patches, rather than evenly, in order to save time and money.  “What we’ve found is, if you can get the soil deposited every 40 feet (9 m), you start changing the temperature in the whole area, and not just where the soil was dropped. The breeze will spread the warmth, and the snow in between the patches of soil will melt a lot faster.  We do adjust our spacing depending on the amount of snow. If there’s more snow, that means we’ve got less time, and it’s got to melt faster, so we’ll place the patches of soil closer together for more even coverage.  

Tractor sitting in a field with a researcher standing in front of it

Using a tractor to spread the soil in patches, rather than evenly, saves time and money.

Campbell adds that he is selective on which field he spreads the soil.  If the weather conditions are not looking good, and they have deep snow, then they may skip a field they think they can’t save.  Or if the fields further south have less snow, and the weather looks warm, they may also skip that field because the snow may melt on it’s own.  There are challenges in trying to make those predictions, however.  He says, “It’s hard to make those guesses based on the weather forecast because the predictions just aren’t very accurate a couple of weeks out. One year the forecast was sunny, so we applied fly ash to the fields.  But the next day it snowed a foot, and it was two weeks before that snow melted so the sun could get to the ash.  We lost quite a bit of grain that year.”

Sun shining on a wheat field

Campbell is selective on which field he spreads the soil.

Future Plans

Next year Campbell will try mixing the soil with some fly ash, to take advantage of the ash’s darker color.  He says, “We’re going to keep putting the soil back on the field. It’s less expensive, and we don’t have to haul it. Next year we’ll try mixing the soil with about ⅓ ash so we can get it a little blacker.   It will be a nice middle ground where the dark color will melt the snow, yet it won’t cost too much.  And we can redistribute the eroded, nutrient-rich topsoil.”

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

Aug 1

A New Method for Preventing Snow Mold In Winter Wheat

Each year in early spring, dryland wheat farmers battle for their crop’s survival.  As temperatures climb to 0 degrees C, the dark, wet microclimate underneath the snow begins to propagate snow mold.  

Wheat spikes in a green wheat field

Wheat spikes in a wheat field.

Soil scientist, Dr. Colin Campbell says, “Soil under a blanket of snow can warm as spring temperatures rise, despite their icy covering. Temperatures above freezing and the water from snowmelt are a perfect environment for mold to grow.“

When faced with these weather conditions, wheat growers know they have only a couple of weeks to remove the snow, or large sections of their crop will die off. Melting the snow artificially can be an expensive process, but one southern Idaho wheat grower has found a unique solution that could save both money and the environment.

Fresh fluffy snow

Temperatures above freezing and the water from snowmelt are a perfect environment for mold to grow.

The Old Method  

Traditionally, wheat growers have spread fly ash (ash from coal) on the spring snow to try and speed the melting process.  The black fly ash creates a warmer microclimate by absorbing more solar radiation rather than reflecting it.  To demonstrate its effectiveness, the USDA performed studies using fly ash to speed snow melt, with positive results. However, growers say the challenge is using the method in a way that is economical on dryland wheat where the profit margin is narrow.  Bryce Campbell, a dryland wheat farmer near Burley, ID, says, “Some people use fly ash to get in the field faster or to get the water flowing into the soil, but our primary goal is to prevent snow mold from killing the winter wheat.  If that happens, we have to replant the crop to a spring crop which yields a lot less.  Our goal is to try and keep our crop alive.”  

Field with loose top soil and extensive edging

During heavy rain events, topsoil washed down to the edges of the field, collecting in dikes Campbell constructed.

An Inexpensive New Method

Campbell has used fly ash in the past, but last year, he had a better idea.  He noticed that during heavy rain events, some of his topsoil washed down to the edges of the field, collecting in dikes he constructed and eventually becoming dried and powdery. He wondered if he could use that soil as an economical replacement for fly ash. In the fall, he collected some in a truck and left it to dry completely in the back of his shed; then this season, he spread it over the spring snow. Seeing the results, he decided it was worth the effort, both economically and environmentally.  Campbell estimated the fly ash melt to be approximately 30% faster than the powdered soil because of its darker color, but the soil was free, which made a difference in his bottom line.

wheat crop

If snow mold kills the wheat crop, growers have to replant the crop to a spring crop which yields less.

He adds, “Some of the wheat farmers down the road are using a finely ground coal dust product to melt their snow. It’s a great product, and it works really well for melting snow, but their cost is about $20/acre.  When you spread that on a thousand acres, that’s $20,000.  I can put my soil on a thousand acres, and my only cost is two hours of gathering up the soil plus a day and a half in the tractor for application.”

Next week:  Find out which techniques Campbell uses to save time and money redistributing his displaced soil.

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

Jul 8

Improving Drought Tolerance in Soybean

Limited water availability is a significant issue threatening the agricultural productivity of soybean, reducing yields by as much as 40 percent. Due to climate change, varieties with improved drought tolerance are needed, but phenotyping drought tolerance in the field is challenging, mainly because field drought conditions are unpredictable both spatially and temporally.  This has led to the genetic mechanisms governing drought tolerance traits to be poorly understood. Researcher Clinton Steketee at the University of Georgia is trying to improve soybean drought tolerance by using improved screening techniques for drought tolerance traits, identifying new drought tolerant soybean germplasm, and clarifying which genomic regions are responsible for traits that help soybeans cope with water deficit.

Seedlings sprouting

Researchers are trying to improve soybean drought tolerance by using better screening techniques for drought tolerance traits.

Which Traits Are Important?

Clinton and his colleagues are evaluating a genetically diverse panel of 211 soybean lines in two different states, Kansas and Georgia, for over two years to help him accomplish his research objectives. These 211 lines come from 30 countries and were selected from geographical areas with low annual precipitation and newly developed soybean lines with enhanced drought-related traits, along with drought susceptible checks. The researchers are looking at traits such as canopy wilting.  Some plants will take a few days longer to wilt, allowing these plants to continue their photosynthetic ability to produce biomass for seed production. Other traits that he is interested in evaluating are stomatal conductance, canopy temperature with thermal imaging, relative water content, and carbon isotope discrimination.

Beans growing on a stalk

The scientists want to monitor traits such as canopy wilting.

Use of Microclimate Stations to Monitor Environmental Conditions

Clinton says to make selection of drought-tolerant lines easier and more predictable, knowledge of field environmental conditions is critical. He says, “You can phenotype all you want, but you need the true phenotype of the plant to be observed under real drought conditions so you can discover the genes for drought tolerance and improve resistance down the line in a breeding program.”

In addition to soil moisture sensors, the team used microclimate weather stations to help monitor water inputs at their two field research sites and determine ideal time periods for phenotyping drought-related traits.  Steketee says, “We put microenvironment monitors in the field next to where we were growing our experimental materials.  Both locations use those monitors to keep an eye on weather conditions throughout the growing season, measuring temperature, humidity, and precipitation. Since we could access the data remotely, we used that information to help us determine when it was time to go out to the field and look at the plots. We wanted to see big differences between soybean plants if possible, especially in drought conditions. By monitoring the conditions we could just go back to our weather data to show we didn’t get rain for 3 weeks before we took this measurement, proving that we were actually experiencing drought conditions.”

Soybeans

The team identified some lines that performed well.

Results So Far

Though 2015 wasn’t a great year for drought in Georgia, Clinton says there was a period in late July when he was able to measure canopy wilting, and they identified some lines that performed well.  He says, “We compared our data to the data collected by our collaborator in Kansas, and there are a few lines that did well in both locations.  Hopefully, another year of data will confirm that these plants have advantageous drought tolerance traits, and we’ll be able to probe the advantageous traits out of those lines and integrate them into our breeding program.”

Future Plans

The team will use what’s called a genome-wide association study approach to identify genomic regions responsible for drought tolerance traits of interest. This approach uses phenotypic information collected from the field experiments along with DNA markers throughout the soybean genome to see if that marker is associated with the trait they are interested in.  If the scientists find the spot in the genome that is associated with the desired trait, they will then develop genomic tools to be used for selection, integrate that trait into elite germplasm, and ultimately improve the drought tolerance of soybeans.

See weather sensor performance data for the ATMOS 41 weather station.

Explore which weather station is right for you.

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

Jun 24

1 Comment

Lysimeters Determine If Human Waste Composting Can Be More Efficient (Part 2)

In Haiti, untreated human waste contaminating urban areas and water sources has led to widespread waterborne illness.  

Hospital rooms in Haiti with patients infected with cholera

Waterborne disease is the leading cause of death for children under 5. Currently, Haiti is battling the largest cholera outbreak in recent history. Over 1/6 of the population is sickened to date.

Sustainable Organic Integrated Livelihoods (SOIL) has been working to turn human waste into a resource for nutrient management by turning solid waste into compost.  (See part 1).  

Water ways infected with waste and trash

Contaminants making their way into the waterways.

The organization plans on performing experiments with lysimeters, to determine if human waste will contaminate Haitian soil during the composting process.

A river infected with waste right below a huge forest

Even in places where there are toilets, they are often poorly designed or poorly placed. This latrine is located just above a river, where people are getting their bathing and drinking water.

Lysimeters Help Assess Health Hazards

SOIL will use G3 passive capillary lysimeters in an experiment to determine if composting human waste without a barrier between the waste and the soil will result in ecological and/or health hazards.  Why? The problem is “jikaka,” or “poo juice.”  The compost facility currently redistributes it onto the compost and finishing piles, but they would rather not have to manage it. They believe if they remove the concrete slab and allow composting to occur in contact with soil, the composting process will be easier and faster.

Mounds of dirt behind a tree

SOIL’s agricultural team conducts studies on the use of compost to improve farming practices and maximize economic benefits of targeted compost application.

The Experiment

The organization will test their idea as they expand their facility. New compost bins and staging areas for finishing have been built absent concrete pads. G3 passive capillary lysimeters have been installed, three beneath the compost bin, and four beneath the first staging area for finishing. They will be used to monitor the amount of moisture (jikaka) that travels through the soil as well as check for anything harmful that travels with it.

Children holding soil in their hands

SOIL’s human waste compost was found to increase sorghum yields by 400%.

What’s the Future for Konpòs Lakay?

SOIL’s agricultural team studies the use of their compost (Konpòs Lakay) in order to optimize farming practices and the economic benefits of targeted compost application. The data they collect will help them expand the market for Konpòs Lakay, which in turn will support the sustainability of SOIL’s sanitation programs.

For more information on SOIL’s waste treatment efforts, visit their website, or watch the video below, a TEDx talk given by SOIL co-founder, Sasha Kramer.

Discover G3 Drain Gauge passive capillary lysimeters→

Download the “Researcher’s complete guide to soil moisture”—>

LinkedInMessengerRedditThreadsCopy

Jun 17

1 Comment

Lysimeters Determine If Human Waste Composting Can Be More Efficient

In Haiti, untreated human waste contaminating urban areas and water sources has led to widespread waterborne illnesses such as typhoid, cholera, and chronic diarrhea.

Human wastes are making their way into Haiti’s waterways.

Human wastes are making their way into Haiti’s waterways.

Sustainable Organic Integrated Livelihoods (SOIL) has been working since 2006 to shift human waste as a threat to public health and source of pollution to being a resource for nutrient management by turning solid waste into compost.  This effort has been critical to sustainable agriculture and reforestation efforts, as topsoil in Haiti has severely eroded over time, contributing to Haiti’s extreme poverty and malnutrition.

Border between Haiti and the Dominican Republic from an aerial view

This is a very famous image of the border between Haiti and the Dominican Republic. It’s often used to demonstrate how badly off Haiti is relative to their neighbors. What you’re actually seeing is the environmental scars of a very different post-colonial history.

Why Compost?  

Topsoil erosion in Haiti was estimated to be 36.6 million metric tons annually in 1990, and it is estimated that only one sixth of the land currently cultivated in Haiti is suitable for agriculture. SOIL combats desertification by producing over 100,000 gallons of agricultural-grade compost made from human waste annually.  SOIL research has shown that this compost can increase crop yields by up to 400%.  The organization has sold over 60,000 gallons of this compost to local farmers and organizations, increasing soil organic matter and nutrients throughout the country.

Waste covers the urban area infecting people and causing problems

Today in Haiti, only 25% of people have access to a toilet – meaning people are forced to go to the bathroom outside or in urban areas, in a plastic bag, which often times gets disposed of in a canal or an empty lot.

How Do They Do It?

SOIL distributes specially constructed toilets throughout Haiti that separate urine from solid waste.  Odors are reduced by covering the solid waste with organic cover material.  The toilet utilizes a five gallon bucket to collect solid waste that can be swapped out when full.

Toilet in Haiti

Instead of flushing nutrients away with fresh water, people use a dry carbon material to cover it up so that it doesn’t smell, and it doesn’t attract flies. This material also provides food for the microbes that will ultimately transform the poop.

The five gallon buckets are collected weekly and taken to the composting facility, where they are dumped into large composting bins.  It takes about 1500 buckets (3-4 days worth) to fill each bin. Bins are required to reach 122°F and left for 2.5 months in order to kill all pathogens.

Waste water transformation chart

Wastes are safely transformed into nutrient-rich compost in a carefully monitored composting treatment process that exceeds the World Heath Organization’s standards for the safe treatment of human waste.

The compost is then removed from the bin and turned by hand. There are three concrete slabs used to manage the finishing process.  Compost is turned horizontally and then moved forward to the next slab, allowing multiple batches to be finishing at the same time, each at a different stage.  After processing, the compost is sifted, bagged, and sold, reinvigorating the agriculturally-based Haitian economy.  

Students study plants sold for agriculture

The compost SOIL produces is bagged under the Haitian Creole brand name “Konpòs Lakay” and then sold for agricultural application, improving both the fertility and water retention of soil. With over four billion people worldwide currently lacking access to waste treatment services, finding ways to provide waste treatment services profitability through the private sector has the potential to dramatically improve public health and agricultural outputs globally.

Continue reading part 2→

Understand the Impact

Watch this 5 minute video filmed by independent parties to see how SOIL is impacting Haitian citizens and the environment.

Read how experiments using lysimeters will help SOIL make the composting process more efficient.  

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

Jun 11

Founders of Environmental Biophysics: Champ Tanner

Champ Tanner

Champ Tanner (November 16, 1920 – September 22, 1990) Image: soils.wisc.edu

We interviewed Gaylon Campbell, Ph.D. about his association with one of the founders of environmental biophysics, Champ Tanner.

Who was Champ Tanner?

Champ Tanner was a dominant scientist in his time and a giant among his colleagues.  He was the first soil scientist to be elected a member of the National Academy of Sciences: the highest honor a scientist can achieve in the United States.  Some may not realize that throughout a career filled with achievements and awards, he battled the challenges of a debilitating illness.  He didn’t let that limit his passion for science, however.  His efforts to understand and improve measurements generally went beyond those of his fellow scientists.  One of his colleagues once said of him, “Champ’s life exemplified goal-oriented determination and optimism regardless of physical or financial impediment.”

Green wheat stalks

Dr. Tanner was one of the pioneers in applying micrometeorology to agriculture.

What were his scientific contributions?

Champ was an extremely careful experimentalist who was gifted at developing instrumentation.   He started out making significant contributions in soil physics such as improved methods for measuring water retention, particle size distribution, air-filled porosity, and permeability.  He was one of the pioneers in applying micrometeorology to agriculture and was passionate about finding ways to improve the precision and reliability of measurements.  No measurement was too difficult.  He designed and built his own precise weighing lysimeters which provided measurements of evapotranspiration in as little as 15 minutes.   Later, he switched to plant physiology, reading almost every published paper on the subject and then building his own thermocouple psychrometer and plant pressure chambers, making important contributions in that field.

His largest contribution, however, was the measure of excellence he inspired in the students that he trained.   I don’t know of anybody, anywhere in the world, that produced a crop of students that has attained the levels that his have.  They’ve all made enormous contributions in many different fields.  Perhaps it was because he was a pretty hard taskmaster.   He expected the students to meet a standard, and the ones that struggled with that had a hard time. In fact, to this day one former student complains, “About once a year, I have a nightmare in which Champ appears.”

Boy walking through a library

I don’t know of anybody, anywhere in the world, that produced a crop of students that has attained the levels that his have.

Champ wanted his students to measure up, but he also cared about them.  His fellow scientist, Wilford Gardner, described him this way, “There was a transcendent integrity to his personality that permeated everything he did.  He could be blunt, candid and forthright, but he was never lacking in compassion and concern for students, colleagues, and friends.”

What was your association with him?

I had a wonderful relationship with Champ, although I wasn’t one of his students. One of his former students came to WSU as a visiting scientist and told him about what I was working on.  As a result, he brought me into his inner circle of associates and played a vital role in the success of my research.  This association even extended to my family who were with me on one of my many trips to Madison. Despite my numerous and occasionally unruly progeny, he and his wife welcomed us like long lost relatives and made each of the children feel special.  That’s who they were: the most caring and outgoing people.

Champ also had a sense of humor.  He used to call me up to have long discussions about science, and because he was two time zones ahead, it would get pretty late for him. We’d be having an intense discussion about experimentation, and all of a sudden he’d stop and say, “Oh, I’d better cut this off, or I’ll get home to a cold supper and a hot wife.”

What kind of a person was he?

If you worked in his lab, you needed to tow the mark.  You didn’t leave tools around, and you didn’t mess them up. If you left out a screwdriver, you’d find it on your desk the next morning with a terse note.  And if you took the diagonal pliers, cut some hard wire with it and left some nicks, those would be on your desk too. It was a sort of tough love, but he used it to train his students to the highest possible level.  

Researcher looking through a microscope

He taught his students to be rigorous in their measurement protocols

He wanted his students to stand up and argue for their point.  If you were the kind of person that could stand your ground and put up a good defense, he loved that.  Gardner described Champ in this way, “His work hours were legendary.  His standards of science and personal integrity were almost unrealistically high.  The stories his students now pass on to their students may sound apocryphal to those who did not know Champ.  But it was impossible to exaggerate where Champ was concerned.”

What do you think scientists today can learn from him?

What we can learn from Champ Tanner is not to fool ourselves.  He thought you should try to come to an answer in a few different ways, to be sure that it really was the answer. He taught his students to be rigorous in their measurement protocols in order to get the noise out of their experiments.  He wanted them to dig to the bottom of problems and understand the details.  In his mind, you couldn’t be a scientist and rely on somebody else to figure out heat transfer or radiation. He thought you should understand it well enough that you could defend it yourself.   

You can read more about Champ Tanner’s life and scientific contributions in this biographical sketch, written for the National Academy of Sciences when he died.

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

Jun 3

1 Comment

Are Biodegradable Mulches Actually Better for the Environment? (Part II)

In a continuation of last week’s post, Henry Sintim, PhD student at Washington State University is investigating whether biodegradable mulches are, in fact, what they claim to be (see part I).

Resercher gathering data from an installation site

Lysimeter readings revealed higher EC measurements.

Leaching

Sintim and his team want to understand what’s leaching through the soil as the mulches degrade.  He installed passive capillary lysimeters at a 55 cm depth to collect leachate samples for analysis of BDM particulates.  He was surprised when the lysimeter readings revealed higher EC measurements. However, the EC in the PE, paper mulch, and no-mulch treatments were also high, hence that could be due to the leaching of accumulated salts in the soil surface. He says, “We have yet to examine the leachate samples for the presence of particulates.”   

Researchers installing lysimeters

Installing lysimeters

Composting Alternatives

If the team finds that some of the BDMs do not biodegrade very well in the field, the alternative could be on-farm composting, which would be more viable than having to deal with polyethylene plastic.  Sintim and his research team have set up a composting study where they have been digitizing the images of the mulches degrading.  He adds, “We buried the mulches in a mesh bag, and periodically we retrieve the bags to study the mulch. There was some black staining on the mesh bag, which we suspect is a nanoparticle called, “carbon black,” used as reinforcing filler in tires and other rubber products.

Scientist studying how mulches degrade over time

The team buried the mulches in compost, and periodically they retrieve the mesh bags to study the mulch.

Sintim says the manufacturers do not disclose the actual constituents of their mulches, so he has arranged to examine the mesh bags with WSU’s scanning electron microscope in order to confirm that the stains were due to the presence of particulates. Sintim confirmed that carbon black was used in their experimental BDM, but they don’t know whether the carbon black was made from petroleum products, as there is non-petroleum-based carbon black.  He is going to determine whether these particles leach through soil by examining leachate samples from the lysimeter. He will also perform more tests to make sure that these nanoparticles are not going to have any adverse effects on the agro-ecosystem.

What’s in the Future?

While Sintim and his colleagues have made important discoveries, there is still work to be done. He and his team are going to collect three more years’ worth of data to see if there really is a BDM that delivers on its promises and if leaching particles pose a threat to the groundwater.

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

May 27

1 Comment

Are Biodegradable Mulches Actually Better for the Environment?

Henry Sintim, PhD student at Washington State University, is investigating whether biodegradable mulches are, in fact, what they claim to be.

Plant row farm with dirt between each row

Application of plastic mulches conserves water, and helps in weed, pest, and disease control.

He and his research team want to understand what leaches into the soil as the mulches degrade and which ones perform as well as polyethylene-made plastic mulches (PEs) at weed, pest, and disease control.

Plastic Mulch

Application of plastic mulches in agriculture is a common practice by specialty crop producers worldwide. It conserves water, and helps in weed, pest, and disease control, subsequently improving crop yield and quality. Because PE is durable and does not degrade in the soil, you cannot leave it in the field, which ultimately leads to the question of disposal.  When PE is buried in the field, it becomes contaminated with soil and can’t be recycled but instead requires transport to a landfill, increasing production costs. Another problem arises when landfill facilities are not available. When this is the case, growers stockpile PE on their farm, where the rain can wash the mulch down to streams and water bodies. Henry Sintim and his team are investigating whether or not biodegradable plastic mulches (BDMs) could be a viable alternative.

Researchers digging a site up for installation

The team installs a lysimeter beneath the mulches.

Biodegradable Alternatives

Substituting PE with BDM could alleviate the need for disposal. However, Sintim says the potential impact on agricultural soil ecosystems needs to be assessed before adopting biodegradable mulch for field use. For instance, do biodegradable mulches really degrade?  Sintim explains, “By BDM, we mean it is plastic mulch, but it has been made from pure or partial biobased materials. Though there are plastic mulches advertised as biodegradable, none have actually been proven to biodegrade, so the team is examining degradation of different commercial BDM types over time. They have also included an experimental BDM, in which the constituents were specified by the team.”

Sintim is monitoring the degradation of BDM by assessing the material properties and measuring the particle size and surface area via photography: digitizing and analyzing them using Image J software.

Researchers standing at an installation getting data

There are indications that some of the BDMs are performing well.

How Well Do the Mulches Compare?

Sintim also wants to find out how well BDMs maintain microclimate in comparison to PE. Since soil temperature and moisture content are important parameters that govern chemical reaction rates and microbial activity, and are likely to vary among the different BDM treatments, he is monitoring soil moisture dynamics using soil moisture and temperature sensors installed at 10 cm and 20 cm depths. In addition, the team has installed sensors directly underneath the mulches to measure surface temperature and light penetration. Reduction of light penetration is the attribute that helps plastic mulches to control weeds. The team is also assessing soil quality using the USDA Soil Quality Test Kit.  

Sintim says so far one of the commercial BDMs and the experimental BDM had the same yield performance as PE.  He adds, “We don’t have final results yet, and there are a lot of variables that could come into the picture. But I will say there is an indication that some of the BDMs are performing well.”

Next week:  Find out how Sintim will determine what’s leaching into the soil and another alternative for polyethylene plastic mulch.

Download the “Researcher’s complete guide to water potential”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

Apr 29

Does Early Planting Increase Risk to Winter Canola?

Many dryland winter canola growers assume that if they plant earlier, they will establish a stronger plant, but Washington State University researcher Megan Reese recently found that this was not the case.  She and her team discovered that planting earlier increases risk to the plant, as more water is used, and the reduced amount of water then left after the winter season limits spring regrowth. Megan’s findings could be valuable as water is the most yield-limiting factor in eastern Washington state’s wheat-dominated dryland systems, where winter canola has newly emerged as a rotational crop.

Bright yellow canola field in full bloom

Winter canola is cold hardy, but it’s not as resilient as wheat.

Early Planting:

Winter canola is cold hardy, but it’s not as resilient as wheat.  It’s planted in August, much earlier than winter wheat, which is planted in the late fall.  In order to survive, winter canola has to establish a hardy taproot system so that plants have reserves to survive the winter. Megan says, “Opinions vary, but anecdotally, a dinner plate sized plant can survive winter fairly well, so that’s why winter canola is planted in August . However, because establishment and germination can be an issue, we decided to try planting in June at Ritzville, Washington, thinking the soil would be more moist and have a cooler seedbed.  However, the early planting date had a negative effect on winter survival. Not one of the early plants survived.  We found the plants that started earlier used a lot more water, and consequently, the winter rains weren’t enough to refill the soil profile.  Excessive growth and bolting also contributed to low survivorship.”

Methods and Moisture Release Curves:

Megan monitored soil water in the profile several different ways.  At one location she used a neutron probe and hand-sampled gravimetric soil moisture in the top 30 cm of the profile, and in other locations, she was limited to  hand samples.  Then she combined those measurements with local weather stations to provide the crop water balance for the canola.  Using these data, she was able to determine soil water use as indicated by the water content change through the growing season and calculate the depletion of soil water.  

Image of blooming winter Canola

Anecdotally, a dinner plate sized plant can survive winter fairly well.

Megan also took soil samples into the lab from each depth increment at every site and used a chilled mirror hygrometer to construct a moisture release curve.  This helped her to define the apparent permanent wilting point at -1.5 MPa.  She says, “I was able to then see how efficient canola was at extracting available water, and I could look at available water instead of total water contents, which was more useful in terms of plant accessible moisture in the soil profile. It allowed me a consistent platform to compare actual water amounts across sites with differing soil types.  At one site, 12.5% of the water was unavailable, but in the sandier soils at another site, it was 4%.  So there were significant differences in permanent wilting point.”

Water and Physiological Challenges Affect Winter Survival:

Megan found that the June planted canola used every milliliter of available water in the soil profile by late October/early November, but August-planted canola still had some water above wilting left in the profile over the winter, which helped the plants in the spring.  She says, “It was a milder winter, so we didn’t get the usual amount of snow and rain, which probably played a role, but we did not see the profile refilled in the June-planted canola.  In addition, those June plants were purple and wilted by November, so water stress could have hurt the plants in terms of its defenses. However, I think a larger issue was that they grew so large (the crowns actually elongated and bolted so they weren’t close to the soil) they were more susceptible to the harsh temperatures, whereas the August planted canola were much smaller and their crowns stayed right on the soil surface.”  These findings are based on only one year of data, and Megan notes that early plantings have worked well in the milder climate of Pendleton, OR.

What Does it Mean for Farmers?

Megan says, “We were able to surprise a lot of farmers by showing that canola roots access water down to 1.5 to 1.7 m in the fall; it was hard to believe that a winter crop would do that. Also, in my second year’s data, we followed water use all the way through harvest, so we were able to show how much yield we gained for every millimeter of water used, and farmers liked hearing that number as well.  I think it’s useful information that incorporates biophysics principles and answers some questions that these new canola producers are interested in.  I have three locations this season that we are currently following to give farmers a further idea of what the water use looks like, when canola uses that water, and from where in the soil profile.  Hopefully, this research will help them manage their rotations and look at the possibility of adopting canola.”

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy

Mar 23

1 Comment

Can Wastewater Save The United Arab Emirates’ Groundwater? (Part II)

With very little recharge and irrigation comprising 75% of groundwater use, natural water resources in the United Arab Emirates region are disappearing fast (see part I).  Wafa Al Yamani and her PhD advisor, Dr. Brent Clothier, are investigating using treated sewage effluent and groundwater for irrigating the desert forests along UAE motorways.

Abu Dhabi from the ocean looking at the city

Abu Dhabi

Infiltrometers Predict Dripper Behavior:

Wafa and her team used what they call, “the Ankeny twin head method” for site evaluation with infiltrometers, and they’ve been able to use it to predict dripper behavior.  They begin with the head at -60 mm, do a series of measurements to measure steady infiltration, and repeat the process at -5 mm.  They use those measurements to solve Woodings equation which has two unknowns: saturated hydraulic conductivity and capillarity.  Dr. Clothier says, “We’ve done it at two heads, and we can use Woodings equation to solve for the slope of the exponential conductivity curve.  Hence, I can predict with time, the movement of the wetting front away from the dripper.   That’s been very useful to work out what volume of soil we’re wetting.  It tells us if we should have one or two drippers.  In this forest, we think we can get away with two drippers because if they irrigate for two hours, the radius of the wet front will be 20 cm, and the depth will be about 40 cm, which is a sufficient volume of water for the tree roots.”  Dr. Clothier says they also constructed a small dyke around the drippers so they could contain the water inside the drip zone in case of hydrophobicity or uneven sand.  

researcher recording data while sitting on the floor

Wafa on site, using the twin head method.

Treated Effluent Resolves Salinity Issues

Historically, the UAE pumped their sewage effluent into the Arabian Gulf, but recently, there has been a shift toward seeing it as a valuable water resource, not only for the desert forest, but for irrigation of fruit crops and date palms.  Dr. Clothier says, “Once we started getting our results we realized we were irrigating with groundwater that had high salinity, about 10 dS/m, and that treated sewage effluent had only 0.5 dS/m.  This was an important discovery because with the high salinity groundwater, you have to over-irrigate to maintain a salt leaching fraction.  However, when we apply the treated sewage effluent, we immediately see a response in the trees because it has 1/20th of the salt load.”

Dr. Clothier says that there is one problem with the trees responding so well to the sewage effluent.  The treated sewage effluent makes the trees grow taller and faster, so if the ecosystem service you want from the desert forest is that they’re 4-6 meters high, it becomes an issue.  He adds,”This is actually a positive problem, because we can now induce deficit irrigation, thereby creating a larger resource of treated sewage effluent in order to irrigate far more forests.”

Large white irrigation tanks sitting in sand in the desert

Researchers irrigated with water from these tanks which stored groundwater and treated sewage effluent.

What’s The Future?

Dr. Clothier says they started with a pilot study in the UAE in 2014, and it was so successful that they ended up with two fully-funded four-year projects, one on treated sewage effluent, and one investigating the irrigation of date palms. He says they have another 3 ½ years of work in the UAE on these projects, and in the end, their goal is to develop a model for forestry irrigation and soil salinity management, along with developing capability for the measurement and modeling of irrigation impacts on sustainable forestry.  They have recently developed a prototype of a computerized decision support tool for irrigation which will provide sustainable irrigation advice to optimize water use.  The support tool takes into account the need to maintain salt leaching, and actual irrigation records can be entered to enable real-time use.

Download the “Researcher’s complete guide to soil moisture”—>

Get more information on applied environmental research in our

LinkedInMessengerRedditThreadsCopy
« Older Entries
Newer Entries »